Description
Bring your music outdoors with speakers that blend into your landscape
The AW10-HSUB-BR subwoofer offers an elegant, scalable platform for providing high quality audio enhancement to any outdoor area in even the harshest environmental conditions. Specially designed to withstand both extreme heat and cold, this subwoofer works great from the humid, hot conditions of summertime in Florida to the bone-chilling cold of a Minnesota winter. Designed to install quickly and easily in any environment, the AW10-HSUB-BR can be easily hidden in most landscape designs while the rich, deep bass enhances the sound quality for all of your favorite music.
With premium components selected for both durability and audio quality, the AW10-HSUB-BR is designed to enhance audio performance with a large 10” woofer that is designed to disappear into the scenery.
By adding this down firing subwoofer to your audio installation, you are able to overcome the greatest obstacle to good outdoor sound, the lack of adequate bass response. An open environment is the most difficult for achieving adequate sound levels of low frequency sounds such as the bass effects required for modern music. By adding the AW10-HSUB-BR where needed in an installation, the entire system sound quality can be easily improved.
- Rugged ASA+HDPE Enclosure for long-term durability in any outdoor environment
- Provides superior bass while seamlessly blending with the landscaping design
- 70V/100V/8Ω options for use in any application
- Designed for up to 150 watts
- Down firing design to enhance low frequency efficiency
- Adjustable mounting feet for easy leveling on uneven surfaces
- Designed to pair perfectly with Russound AW4-LS-BR and AW6-LS-BR satellite speakers
- Anti-theft security ring for attaching optional security cables or tie-downs
- Five year limited warranty
- Type: Down Firing Subwoofer
- Woofer: 10” (254mm) DVC Long Throw Poly (Santoprene Surround)
- Frequency Response: 38Hz – 300Hz +/- 3dB
- Impedance: 8Ω – 70/100V
- Tap Settings: 70V – 8W, 16W, 32W, 64W, 128W; 100V – 16W, 32W, 64W; 8Ω Bypass
- SPL: 90dB @1w/1m
- Woofer Enclosure: 16“ dia x 17.75”H (40.6 x 45cm)
- Unit Weight: 34 lbs (15.4 kg)
Product Manual: AW10-LSUB-BR and AW10-HS-BR Manual.pdf
DSP Settings Table – Landscape Speakers: DSP Settings Table – Landscape Speakers 072022.pdf
DSP Settings for AW4-LS-BR used with Russound AW Series Subwoofers: DSP Settings for AW4-LS-BR used with Russound AW Series Subwoofers.pdf
DSP Settings for AW6-LS-BR used with Russound AW Series Subwoofers: DSP Settings for AW6-LS-BR used with Russound AW Series Subwoofers.pdf
DSP Settings for mixed models of AW Series Speakers and Subwoofers: DSP Settings for mixed models of AW Series Speakers and Subwoofers.pdf
All sample XML files are set for using a stereo input signal (Left Channel to Input 1 and Right Channel to Input 2) and use Outputs 1 and 2 for stereo speakers and Output 3 for a mono subwoofer output. Feel free to make any adjustments to your particular DSP settings depending on your preferences or installation requirements.
DSP Settings for AW4-LS-BR used with Russound AW Series Subwoofers: AW4-LS-BR with AW Series Subwoofer miniDSP Example.xml
See first table below
DSP Settings for AW6-LS-BR used with Russound AW Series Subwoofers: AW6-LS-BR with AW Series Subwoofer miniDSP Example.xml
See second table below
DSP Settings for mixed models of AW Series Speakers and Subwoofers: Mixed Models AW Series Speakers and Subwoofers miniDSP Example.xml
See third table below
Recommended DSP Settings when using AW4-LS-BR speakers with any Russound AW Series Subwoofer |
||
|
Settings for the AW4-LS-BR |
||
|
|
Left Channel of Audio |
Right Channel of Audio |
|
Input |
1 |
2 |
|
Output |
1 | 2 |
|
Crossover Filter |
24/dB/Octave LR* Highpass Filter set to 200Hz |
24/dB/Octave LR* Highpass Filter set to 200Hz |
|
Input Routing Configuration in miniDSP 2×4 HD (Outputs 1 and 2 are stereo and Outputs 3 and 4 are summed mono outputs) |
|
|
|
Bandpass Output Configuration to AW4-LS-BR Output 1(Left) and 2(Right) |
|
|
Settings for the AW Series Subwoofer |
||
| Crossover Filter |
48db/Octave BW* Highpass Filter set to 30Hz 24 dB/octave BW Lowpass Filter set to 200Hz |
|
|
Bandpass Output Configuration to AW Series Subwoofer Output 3 (It is outputting a summed mono signal of Inputs 1 and 2) |
|
|
|
Parametric Filter 1 |
Low Shelf Filter set to 115Hz, 5.0dB Gain with Q=1 | |
|
Parametric EQ Band 1 for Output 3 for the AW Series Subwoofer |
|
|
|
Parametric Filter 2 |
Peak Filter set to 35Hz, 1.0dB Gain with Q=1 | |
|
Parametric EQ Band 2 for Output 3 for the AW Series Subwoofer |
|
|
Recommended DSP Settings when using AW6-LS-BR speakers with any Russound AW Series Subwoofer |
||
|
Settings for the AW6-LS-BR |
||
|
|
Left Channel of Audio |
Right Channel of Audio |
|
Input |
1 |
2 |
|
Output |
1 | 2 |
|
Crossover Filter |
24/dB/Octave LR* Highpass Filter set to 150Hz |
24/dB/Octave LR* Highpass Filter set to 150Hz |
|
Input Routing Configuration in miniDSP 2×4 HD (Outputs 1 and 2 are stereo and Outputs 3 and 4 are summed mono outputs) |
|
|
|
Bandpass Output Configuration to AW6-LS-BR Output 1(Left) and 2(Right) |
|
|
Settings for the AW Series Subwoofer |
||
| Crossover Filter |
48db/Octave BW* Highpass Filter set to 25Hz 24 dB/octave BW Lowpass Filter set to 150Hz |
|
|
Bandpass Output Configuration to AW Series Subwoofer Output 3 (It is outputting a summed mono signal of Inputs 1 and 2) |
|
|
|
Parametric Filter 1 |
Low Shelf Filter set to 90Hz, 5.0dB Gain with Q=1 | |
|
Parametric EQ Band 1 for Output 3 for the AW Series Subwoofer |
|
|
|
Parametric Filter 2 |
Peak Filter set to 30Hz, 1.0dB Gain with Q=1 | |
|
Parametric EQ Band 2 for Output 3 for the AW Series Subwoofer |
|
|
Recommended DSP Settings when mixing models of AW Series Speakers and Subwoofers |
||
|
Settings for the AW Series Speaker(s) |
||
|
|
Left Channel of Audio |
Right Channel of Audio |
|
Input |
1 |
2 |
|
Output |
1 |
2 |
|
Crossover Filter |
24/dB/Octave LR* Highpass Filter set to 150Hz |
24/dB/Octave LR* Highpass Filter set to 150Hz |
|
Input Routing Configuration in miniDSP 2×4 HD (Outputs 1 and 2 are stereo and Outputs 3 and 4 are summed mono outputs) |
|
|
|
Bandpass Output Configuration to AW6-LS-BR Output 1(Left) and 2(Right) |
|
|
Settings for the AW Series Subwoofer(s) |
||
| Crossover Filter |
48db/Octave BW* Highpass Filter set to 25Hz 24 dB/octave BW Lowpass Filter set to 150Hz |
|
|
Bandpass Output Configuration to AW Series Subwoofer
Output 3 (It is outputting a summed mono signal of Inputs 1 and 2) |
|
|
| Parametric Filter 1 |
Low Shelf Filter set to 90Hz, 5.0dB Gain with Q=1 |
|
|
Parametric EQ Band 1 for Output 3 for the AW Series Subwoofer |
|
|
| Parametric Filter 2 |
Peak Filter set to 30Hz, 1.0dB Gain with Q=1 |
|
|
Parametric EQ Band 2 for Output 3 for the AW Series Subwoofer |
|
|
