Description
The BSK-1 Bluetooth® Source Kit enables a portable media player, smartphone, or other device equipped withBluetooth wireless technology to transmit audio content to any multiroom audio system.
When used with a Russound MCA-Series controller, the BSK-1 kit can be used as a global source for system-wide access, or as a Local Source for independent use by a specific room. Local source use with MCA-Series controllers provides additional automation features automatically turning on the audio, selecting the BSK-1 source input and setting the volume in a room configured as the ‘Primary Zone’ via SCS-C5 software.
The BSK-1 is comprised of two components, the BTC-1X Remote Transceiver and the BTC-1 hub that is used for audio wiring connections, power, and 12vDC trigger connections to the main audio system.
The BTC-1x Remote Transceiver is wired with a single CAT-5 cable up to 300′ allowing for optimum placement in different system environments. In other words, you can locate the BTC-1 hub near your main audio equipment in one area of the house and remotely locate the BTC-1X transceiver in the bedroom, living room, or other area where the Bluetooth source device will be located. The BTC-1X transceiver features a 49′ (15m) range and the Advanced Audio Distribution Profile (A2DP) ensures high quality stereo audio. It utilizes advanced aptX encoding for CD-like quality from supported devices.
- Add Bluetooth audio streaming to a multiroom audio installation
- Remote transceiver for optimum range placement
- aptX encoding for CD-like audio quality
- Free custom naming software for easy identification when using more than one in a home
- Shipping Dimensions 4.9″ (W) x 2.5″ (H) x 3.8″ (D) / (12.5 x 6.4 x 9.5 cm)
- Shipping Weight 0.4 lbs (0.2 kg)
- Audio Input Connectors 2 RCA
- CAT-5e Connection RJ-45 (T568A Standard)
- Frequency Range 2,400-2,483.5 MHz
- Max Cable Length 300′ (CAT-5) BTC-1x to BTC-1
- 25′ (RCA cable) BTC-1 to Controller
- Power Input (BTC-1): 12VDC, 200mA
- Power Requirement(s) BTC-1X Remote Transceiver: supplied by BTC-1 via CAT-5
- Trigger Input(s) 12 VDC
- Trigger Output(s) 12VDC 100mA Max
BSK-1 Manual: BSK-1 Manual
BSK-1 Product Brief: BSK-1 Product Brief
BTC-1X Configuration Software: BTC-1X Configuration Software
BSK-1 Image:BSK-1 Product Image
BTC-1X Front Image:BTC-1X Front Image
BTC-1X Rear Image:BTC-1X Rear Image
Since September we’ve been shipping updated BTC-1X that no longer require a PIN code.
The BTC-1X comes configured with the Name Russound. To create a more secure network, it is recommended that a unique Name and Passkey be created at the time of installation and provided to the homeowner.
Follow the steps below to create a unique Name for each BTC-1X.
Note: CAT-5 cable must be connected during programming to provide power to BTC-1X.
1. Plug in the micro USB cable (included) to the USB programming port in the BTC-1X. (see diagram)
2 Connect the micro USB cable to the USB port on the PC.
3. Download the BSK-1 programming software from the dealer portal at www.russound.com.
4. Launch the BTC-1X Configuration Tool software.
5. Enter a unique Name, then Write to device.
6. Disconnect the micro USB cable from the BTC-1X first, then cycle the power on the BTC-1X by removing the CAT-5. Cycling the power will reboot the BTC-1X with the assigned custom Name.
