Description
Better Sound for TV! Control with your TV remote. The Russound TVA2.1 is a digital 2-channel low-profile amplifier designed expressly for integrating with flat panel televisions.
The TVA2.1 delivers smooth, robust sound for an enhanced viewing experience. On-board IR learning allows its volume to be seamlessly controlled by the TV or cable box’s remote control.
“The Russound [TVA2.1] is solidly built, it offers all of the features needed to power a pair of speakers, and it sounds clear and robust. Because of its size I was also able to neatly tuck the amp into a TV stand without it looking out of place”
– Robert Archer, CePro
Its thin footprint means the TVA2.1 can be hidden behind the television or mounted in an in-wall panel behind a television for convenience. The built-in IR learning function eliminates the need for an external control system. This can dramatically reduce the cost of adding additional rooms of audio to a home and keeps the operation simple and intuitive for the homeowner by letting them use their current remote control device.
The TVA2.1 features three input options for flexibility. A traditional analog RCA line level input, and both Digital Coax and Optical S/PDIF. The TVA2.1 supports up to 24bit/96khz digital audio in a PCM stereo format.
- Class-D amplifier 2 x 30W RMS into 8ohm
- 24-bit/96kHz S-PDIF support
- S-PDIF, Optical and Analog Line Level inputs
- 4-pole Speaker Detachable Screw connector and line level Subwoofer output
- IR Learning for basic volume control. IR remote control support
- Small Footprint with mounting options for discreet installation
- External 24v Power Supply
- Shipping Dimensions:
11.6″ (W) x 5.0″ (H) x 7.5″ (D)
(29.5 x 12.7 x 19.1 cm) - Shipping Weight: 2.0 lbs (0.9 kg)
- Amplified Channels: 2
- Frequency Response: 40Hz to 20KHz +/- 1dB, 20Hz -3dB, Sub Out: -3dB at 170Hz
- Input Impedance: 22K
- Line Output: Subwoofer
- Power Output: Continuous Stereo:
30 watts per channel at 8 ohms <1% THD+N - Power Requirement(s): 27 VDC 4.0A (External D235PS Power Supply)
- Signal to Noise Ratio: >90dB 20Hz to 20KHz
- Total Harmonic Distortion: 1% (1KHz @ 1W)
TVA2.1 Product Manual: TVA2.1 Manual.pdf
TVA2.1 Product Brief: TVA2.1_PB.pdf
TVA2.1 Front: TVA2.1_Front.jpg
TVA2.1 Side: TVA2.1_Side.jpg
Click here for Fred Harding’s review of the TVA2.1 in CE Pro
